Description
NeoTimber’s Slatted composite fence panel set gives you the ability to transform your fencing with flexibility and convenience. Choosing a complete fence panel, you receive the kit needed to erect a 1.8m width x 1.8m height fence panel, which includes Slatted composite fence boards, a decorative fence screen option should you require, colour-matched fence board capping rails and a composite fence post set for either hard or soft ground; or the relevant fence post inserts should you be fitting the fence onto either timber or concrete posts.
Overview
- Panel size: 1800mm (w) x 1800mm (h)
- Each panel set includes fence boards, capping rails and your choice of decorative fence screen and post
- Choose from four fence post options dependent on your application
- Capped composite fence boards in contemporary slatted design with a premium brushed texture finish
- Extremely low maintenance, with higher stain and fade resistance
- Easy to install “tongue and groove” system
Fence Boards, Capping Rails & Screens
A standard composite panel set without a screen is supplied with ten Slatted composite fence boards. When stacked, the tongue and grooved profile of the boards are easily assembled to create a 1.8m high panel. The premium, brushed finish of the Slatted board replicates contemporary trellis designs that are typically supplied in individual battens. An easy-to-stack 3-slat panel design makes installation simple and the two-tone colour of the product is certain to elevate the aesthetics of your outdoor perimeter.
NeoTimber’s fence panel configurator also allows you to include a decorative screen into your panel requirements. Should this option be selected, only eight Slatted composite fence slats will be provided per panel, with a fence screen of your choice taking the place of the final two fence boards. All necessary fixing trims are also provided with your NeoTimber® fence screens for safe, secure and easy installation.
Each panel set also includes a set of aluminium fence board capping rails, consisting of a base and top rail that work to lock the composite fence slats in between your desired post option. This product is colour-matched to the composite fencing material and includes all relevant fixings to secure into place.
Fence Post Options
NeoTimber® composite fence panels give you the option of building your fence with the choice of four different fence post options: a composite fence post set for either soft ground or hard ground; as well as inserts for either a concrete or timber fence post installation.
Should you choose a composite panel using either one of NeoTimber’s composite post sets (either for soft or hard ground), a singular composite fence post shall be provided per panel. Each composite post set has a different post support and subsequent installation method. A ground anchor base with spreader bolts is used to install the post onto solid ground and a longer anchor is provided for installation onto soft ground. For the difference in installation methods between these two options, visit NeoTimber’s fencing installation resources. It is important to note that extra individual composite post sets will be required to finish off your run of composite fencing and the number of these will depend on your project, specifically the number of individual runs of composite fencing in your design.
Should you choose fence post inserts for either concrete posts or timber posts, a set of two aluminium inserts are provided that fit directly into your existing post material. Each of these options come in 1.8m lengths and are colour-coded to the fence panel colour you choose.
