Step #2.
Next, drill into the floor where you have placed your marks as shown in diagram 28.
Step #3.
Insert the plastic anchors into the drilled holes as shown in diagram 29.
Step #4.
Position the metal base of the post mount (J-LV-0215-36) over the pre-drilled holes. Insert the screws as shown in diagram 30.
Step #5.
Fix and tighten each screw. Once complete, your post should look like diagram 31.
Step #6.
Install the post sleeve (N-JM088) over the post as shown in diagram 32.
Step #7.
Place the post skirt (K-LV-0119) over the post sleeve as shown in diagram 33.
Step #8.
Finally, place the post cap (L-LV-0120) on top of the post sleeve as shown in diagram 34.
Need Further Support or Advice?
If you’ve still got questions that have not been answered here, or you would like additional advice,
support or assistance then please give one of our friendly experts a call and we’ll be happy to help.
Just give us a call on 01530 382 180.