Composite Louvre Batten Cladding Metal Insert

Composite Louvre Batten Cladding Metal Inserts are recommended where your design requires support spacings wider than the standard 400–600mm fixing centres. With an insert fitted, battens can span up to a maximum of 1200mm centre-to-centre across all three profiles, with the steel core preventing the composite from bowing between supports. For standard installations at 400–600mm centres, an insert is not normally required. Always consult the NeoTimber® installation guide to confirm the requirements of your project.

With a Composite Louvre Batten Cladding Metal Insert fitted, the maximum recommended centre-to-centre support spacing is 1200mm. This applies equally to all three batten profiles: 50mm, 100mm and 150mm. Support spacings should not exceed 1200mm, even with an insert fitted.

Slide the galvanised steel insert into the hollow profile of the NeoTimber® Composite Louvre Cladding Batten. Secure the assembly using the L-shaped bracket arrangement shown in the NeoTimber® installation drawing, fixing through both the composite profile and the steel insert with a grade 304 stainless steel screw. This mechanically locks the insert within the batten, and the insert itself remains concealed once installed.

Yes. On vertical installations, the L-shaped bracket and through-fixing hold the insert securely within the batten, preventing it from sliding down or out over time. Follow the NeoTimber® installation drawing for the correct bracket and fixing positions.

Yes. Each Composite Louvre Batten Cladding Metal Insert measures 3600mm, matching the full length of a NeoTimber® Composite Louvre Cladding Batten. One insert per batten is recommended wherever additional reinforcement is required. For projects involving multiple reinforced battens, calculate the quantity based on the number of individual batten lengths requiring support.