Composite Louvre Cladding Clips

Each clip attaches to the subframe or suitable substrate through a dedicated fixing hole. Once secured, the batten slots over the clip, engaging with its internal profile to hold it firmly in position. The fixing remains concealed within the batten, leaving both faces free from visible screws. Position clips at the recommended 400–600mm centres and follow the NeoTimber® installation guide for the correct fixing arrangement.

Choose the size that matches your NeoTimber® Composite Louvre Cladding Batten. The 50mm & 100mm clip (52mm × 31mm × 18mm) fits both the 50mm and 100mm battens, and the 150mm clip (70mm × 40mm × 18mm) fits the 150mm batten only. If your design mixes the 150mm batten with a narrower width, select both sizes.

Each box contains 100 clips. Count the fixing positions needed along each batten run, using 400–600mm centres if you are installing without the Composite Louvre Batten Cladding Metal Insert, or 1,200mm centres with the Metal Insert. Add these together, divide by 100 and round up to the nearest whole box, ordering each clip size separately for its matching battens. Clips are sold separately from the battens, so remember to add them to your order.