Watch Practical Guides to Building and Fitting Your Composite Deck
NeoTimber’s composite decking how-to installation videos show key stages of the fitting process: installing composite joists, securing boards with concealed fixings and choosing tools for cutting. They help you visualise how components work together before starting your own project.
Use the videos alongside the current composite decking installation guidance. A filmed example demonstrates a particular arrangement; it does not establish that every dimension, fixing or support detail applies to every board and site.
For an introduction to the options, explore our decking guide or browse the composite decking range.
Composite Decking Installation Videos: Choose Your Starting Point
- Installing composite joists: understand a low-level frame on a suitable solid base.
- Fitting composite decking boards: see how starter clips and FastClips work.
- Cutting composite decking: compare a mitre saw, circular saw and jigsaw.
1. How to Install Composite Joists
This video introduces the use of NeoTimber® composite joists for a low-level installation on a suitable solid base. It is a useful starting point for understanding the relationship between the base, supporting joists and board direction.
Do not assume a low-profile joist intended for a solid base can span between posts or be used with any pedestal arrangement. The support system must suit the exact component and application.
What to Check Before Building the Frame
- The condition and suitability of the supporting base.
- The proposed board direction and required joist centres.
- Support at board-end joints, borders and changes in direction.
- Joist movement allowances and clearance from fixed objects.
- The specified fixings, drainage and ventilation arrangements.
Confirm these details in the written instructions before cutting or fixing components. Our decking frame and subframe guide explains the different systems to consider.
2. How to Fit Composite Decking Boards
Once the frame is prepared, this video shows how compatible grooved boards are fitted using concealed fixings. The first row establishes the alignment, followed by the main board runs and the specified final-board detail.
NeoTimber’s fixing options include starter clips, 3mm Metal FastClips and 6mm Plastic FastClips. Use the fitting method for the selected clip rather than assuming the two FastClip systems are installed identically.
Keep Side Gaps and End Gaps Separate
The 3mm and 6mm clip dimensions describe the side-to-side space between neighbouring boards. End-to-end joins and clearances around walls or posts need separate allowances under the current instructions.
Check the prescribed fixing points, tightening method and any drilling requirements before fitting the final board. Do not substitute a generic screw spacing or pilot-hole detail for the specification of your board and application.
Review our decking clips and fasteners guide to help identify each component’s role.
3. How to Cut Composite Decking
The cutting video introduces three useful tools, each suited to different tasks:
- Mitre saw: crosscuts and angled ends within the tool’s capacity.
- Circular saw: suitable straight cuts with a properly supported workpiece.
- Jigsaw: notches and shaped details around obstacles.
Choose a blade approved for the tool and material. Secure the board, account for blade width and movement allowances, and test the setup on an offcut before making visible cuts.
Follow the equipment manufacturer’s instructions for operation, guards, dust control and personal protection. Read our cutting composite decking guide for more planning advice.
How to Use These Composite Decking Installation Videos
Watch the relevant sequence before work begins, then organise the written instructions and components for that stage. This makes it easier to identify questions before they become on-site changes.
- Confirm the board, layout and intended use.
- Read the pre-installation information for storage, handling and preparation.
- Resolve the supporting structure and unusual junctions.
- Check that the clips, screws and finishing components are compatible.
- Watch the relevant video and keep the current written detail available.
If the site differs materially from the example, ask for advice. Elevated decks, roofs, balconies and unusual loads need assessment beyond a general demonstration.
FAQs About Composite Decking Installation Videos
Do the videos replace the installation instructions?
No. Use them to understand the process visually, with the current written instructions controlling the product-specific details.
Can a beginner install a deck after watching?
The videos can help with understanding, but they do not replace competence with tools or structural design. Assess the project against your experience and use a suitable installer where needed.
Do I need to watch all three videos?
Watch the stages relevant to your project. Understanding how the frame, board fitting and cutting relate to one another can help even if someone else completes part of the work.
Plan Your Next Installation Step with NeoTimber®
These composite decking how-to installation videos bring the main fitting stages into view. Pair them with the current instructions, check the details for your site and resolve questions before starting.
Explore our composite decking, contact NeoTimber® for product advice or enquire about an installer if you would prefer professional fitting support.
